Skip to main content

Web Forms for Marketers: Send Email

To have the save action for your form actually send email, you will need to change one of the settings, otherwise you will receive this error whenever submitting the form:

We experience a technical difficulty while processing your request. Your data may not have been correctly saved.

Also in your log (/data/logs/newest log file) you will see this error after the form has been submitted:

Exception: System.Net.WebException
Message: The remote name could not be resolved: 'example.host'
Source: System
at System.Net.ServicePoint.GetConnection(PooledStream PooledStream, Object owner, Boolean async, IPAddress& address, Socket& abortSocket, Socket& abortSocket6, Int32 timeout)
at System.Net.PooledStream.Activate(Object owningObject, Boolean async, Int32 timeout, GeneralAsyncDelegate asyncCallback)
at System.Net.PooledStream.Activate(Object owningObject, GeneralAsyncDelegate asyncCallback)
at System.Net.ConnectionPool.GetConnection(Object owningObject, GeneralAsyncDelegate asyncCallback, Int32 creationTimeout)
at System.Net.Mail.SmtpConnection.GetConnection(String host, Int32 port)
at System.Net.Mail.SmtpTransport.GetConnection(String host, Int32 port)
at System.Net.Mail.SmtpClient.GetConnection()
at System.Net.Mail.SmtpClient.Send(MailMessage message)
WARN Web Forms for Marketers: an unhandled exception: Failure sending mail. has occured while trying to execute an action.

In your content tree, browse down to: /sitecore/system/Modules/Web Forms for Marketers/Settings/Actions/Save Actions/Send Mail


Under that item there will be a submit section with parameters:


wffmpara


Just replace example.host with your SMTP host information for the server, and form@example.host with the address you want to send mail from – save, and republish!


That should correct the error above and, barring any other issues, hopefully the form will be working as intended!

Comments

  1. There is the situation happens when you need one place for configuring SMTP host name for all web forms in your solution. You can do it in the following way: just remove tags from those forms you need to have the same configuration and set correct SMTP host name in web.config ("MailServer" setting) and that's it :)

    ReplyDelete
  2. did you try the gmail smtp ? I'm facing an issue with it , when I opened the log I found this error
    "The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first "
    Do you have any idea how to solve it?

    ReplyDelete
  3. We were facing a similar issue with Gmail SMTP (security)


    We ended up having to go to another SMTP for now

    http://stackoverflow.com/questions/3724506/sending-sitecore-emails-through-gmail

    ReplyDelete
  4. You're a life saver! :)

    ReplyDelete
  5. Amy, need help...
    Can we conditionally change field validation (optional to required and vice versa) in web form for marketers?
    I need to change validation of a field depending on a droplist field selected value.

    Thanks in advance.
    Vikrant

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Hey Amy I am getting the same error after replacing host and from tag? Then what is the solution for this?

    ReplyDelete
  8. This comment has been removed by a blog administrator.

    ReplyDelete
  9. This comment has been removed by a blog administrator.

    ReplyDelete
  10. This comment has been removed by a blog administrator.

    ReplyDelete
  11. This comment has been removed by a blog administrator.

    ReplyDelete
  12. One tip: always verify email address of all entries in your email list. That way your email marketing campaigns will use fewer resources and will be more effective.

    ReplyDelete
  13. This comment has been removed by a blog administrator.

    ReplyDelete
  14. This comment has been removed by a blog administrator.

    ReplyDelete
  15. This comment has been removed by a blog administrator.

    ReplyDelete
  16. This comment has been removed by a blog administrator.

    ReplyDelete
  17. This comment has been removed by a blog administrator.

    ReplyDelete
  18. This comment has been removed by a blog administrator.

    ReplyDelete
  19. This comment has been removed by a blog administrator.

    ReplyDelete
  20. This comment has been removed by a blog administrator.

    ReplyDelete
  21. This comment has been removed by a blog administrator.

    ReplyDelete
  22. This comment has been removed by a blog administrator.

    ReplyDelete
  23. This comment has been removed by a blog administrator.

    ReplyDelete
  24. This comment has been removed by a blog administrator.

    ReplyDelete
  25. This comment has been removed by a blog administrator.

    ReplyDelete
  26. This comment has been removed by a blog administrator.

    ReplyDelete
  27. This comment has been removed by a blog administrator.

    ReplyDelete
  28. This comment has been removed by a blog administrator.

    ReplyDelete
  29. This comment has been removed by a blog administrator.

    ReplyDelete
  30. This comment has been removed by a blog administrator.

    ReplyDelete
  31. This comment has been removed by a blog administrator.

    ReplyDelete
  32. This comment has been removed by a blog administrator.

    ReplyDelete
  33. This comment has been removed by a blog administrator.

    ReplyDelete
  34. This comment has been removed by a blog administrator.

    ReplyDelete
  35. This comment has been removed by a blog administrator.

    ReplyDelete
  36. This comment has been removed by a blog administrator.

    ReplyDelete
  37. This comment has been removed by a blog administrator.

    ReplyDelete
  38. This comment has been removed by a blog administrator.

    ReplyDelete
  39. This comment has been removed by a blog administrator.

    ReplyDelete
  40. This comment has been removed by a blog administrator.

    ReplyDelete
  41. This comment has been removed by a blog administrator.

    ReplyDelete
  42. This comment has been removed by a blog administrator.

    ReplyDelete
  43. This comment has been removed by a blog administrator.

    ReplyDelete
  44. This comment has been removed by a blog administrator.

    ReplyDelete
  45. This comment has been removed by a blog administrator.

    ReplyDelete
  46. This comment has been removed by a blog administrator.

    ReplyDelete
  47. This comment has been removed by a blog administrator.

    ReplyDelete
  48. This comment has been removed by a blog administrator.

    ReplyDelete
  49. This comment has been removed by a blog administrator.

    ReplyDelete
  50. This comment has been removed by a blog administrator.

    ReplyDelete
  51. This comment has been removed by a blog administrator.

    ReplyDelete
  52. This comment has been removed by a blog administrator.

    ReplyDelete
  53. This comment has been removed by a blog administrator.

    ReplyDelete
  54. This comment has been removed by a blog administrator.

    ReplyDelete
  55. This comment has been removed by a blog administrator.

    ReplyDelete
  56. This comment has been removed by a blog administrator.

    ReplyDelete
  57. Although there is no a|there is not any} one-size-fits-all resolution, correctly using 3D printing know-how all through product development will cut back design danger and, finally, lead to higher products. Similar to SLS, Multi Jet Fusion additionally builds functional components from nylon powder. Rather CNC machining than using a laser to sinter the powder, MJF uses an inkjet array to use fusing agents to the bed of nylon powder.

    ReplyDelete

Post a Comment

Popular posts from this blog

Using the Source Property

For each of the properties in your template you can set a source for it, this isn’t always used but can improve user experience drastically when done throughout a site. The source field comes in to play whenever you are using any of the following fields: Droplink, Droplist, Droptree, File, Grouped Droplink, Grouped Droplist, Image, Multilist, Treelist, Rich text field and a number of others. There are various ways of setting these up to achieve different results – but in general you are using the source to limit the set of items that can be used, and this requirement can also help you determine what kind of field to use. For example, if you have a Set of items all split down into sub folders and want the content editor to make use of the tree, you could use a TreeList or Drop Tree, but if you just want a set of items without the opportunity to see where those items are – multilists or droplinks are the way to go. For Images you’re generally just specifying where to look for and put th

Determining Page Editor Status with Javascript

     Often you’ll need to know if you are inside or outside the Experience/Page Editor in order perform an action. If you are on the server-side in code-behind you can check the Sitecore.Context.PageMode to determine which mode you are in. But what about at runtime? Javascript per usual can save the day! Though you can find PageModes through the Sitecore object if it is available to the browser, it may not be there. Depending on how things have been set up with your solution, the Sitecore object may not return a null as would be expected when checking to see if you can access it. Instead Sitecore may be undefined.  Contrary to some examples on the web with only null checks, this quick little change in your script can correctly let you know if you are in the page editor: Just take a look to see if isPageEditor is true or false and you’re set!